PESUTEN-Remote Control LED Picture Light


Item Weight ‎9.6 ounces
Package Dimensions ‎13.54 x 2.87 x 1.65 inches
Material ‎Aluminum, Metal, Polycarbonate
Included Components ‎Bulb included
Voltage ‎12 Volts (DC)
Specific Uses ‎Dart board cabinet, Indoor use only, Gallery, Home
Special Features ‎Light Modes, Dimmable, Timer, Rotatable Head, Remote Control
Power Source ‎DC
Wattage ‎5.4 watts
Color Temperature ‎3000 Kelvin

  • Plug-in Picture Light: Plug in and play, so you can free form the worry
    that charging the light frequently, 18pcs led beads of this picture
    light for paintings consuming only 5.4w, ennergy saving. 330lm with
    3000k color temperature, enough brightness and adding more ambience.

  • Remote Control: Equipped with a remote controller, this display light
    can be dimmed from 10% to 100%, and can be set at 15mins, 30mins,
    60mins, 120mins to auto off. Also, multiple light flashing modes and
    flashing frequency to create different atmosphere.

  • Brightness Adjustable: Press 25%, 50% or 100% directly, or press the
    “bright+” or “bright-” button to adjust the brightness of this painting
    light. Just adjust the brightness as you like, no flicker, no strong
    brightness to distract your eyes.

  • 270° Adjustable Head: 270° swivel light head of this picture frame light
    allows you to tilt it upward or downward. Thus adjusting the light
    focus to create different effect. 120° beam angle always light up a
    suitable area around your artwork.

  • Easy Installation & Multipurpose: This painting light can be easily
    mounted with provided screws. Just tighten the srews to the frame,
    making your beloved painting, poster, tapestry,dartboard,
    portraits,bookcase displays, collections, jewelry display a focal point.

  • Remainder: The remote should be aimed at the picture light within 50ft
    when in use. Most time the remote has been paired with the receiver, if
    it doesn’t work when you first use it, try the below two methods. 1.
    Press the buttons ‘120min’ and ‘60min’ at the same time, hold the
    buttons until you see the lights flashing. OR 2.Hold the button ‘LIGHT’
    on when you power on the lights within 5 seconds, until you see the
    lights flashing.
  • Remainder: You need to hold the buttons for a long time before the led flickers and finally pairs.